To load paper with flop into your printer, open the input tray and pull it out. Adjust the width guides to fit your paper size. Place the paper with the print side up and short edge first. Ensure the tray is raised and the paper support flap is closed. For best results, use portrait orientation … Read more

To load paper into the Deskjet 3720, raise the input tray and its extender. Pull back the input tray shield. Move the paper width guide to the left. Load up to 60 sheets of plain white paper, sliding it down until it stops. Finally, release the input tray shield to secure the paper. Next, stack … Read more

To load paper in the Brother PJ-723 printer, first turn on the printer and make sure no paper is in the input slot. Then, press and hold the button while inserting the thermal paper roll into the slot. The roller will pull the paper in. Ensure proper alignment and do not overload the input slot … Read more

To load paper into an Acer printer: 1. Turn off the printer (optional). 2. Locate and open the paper tray. 3. Adjust the paper guides. 4. Load the paper neatly into the tray. 5. Adjust the guides again for a snug fit. 6. Close the tray. 7. Power on the printer. 8. Test to ensure … Read more

To load paper in the Brother HL printer, pull the paper tray out completely. Adjust the paper guides to match your paper size. Fan the paper stack to avoid sticking. Place the paper in the tray with the print side facing down. Make sure the stack does not go over the maximum paper mark. This … Read more

To load paper on a Kodak AiO printer, first raise the output tray. Then pull out the photo tray and move the left paper-edge guide to the far left. Insert photo paper with the print side down. Push the photo tray back in until it clicks. Check the properties settings to select the correct paper … Read more

To load paper in the HP Envy 5014 printer, open the input tray door and extend the tray. Slide out the paper width guides. Place a stack of plain paper, print side down, in portrait orientation. Push the paper stack into the tray until it is fully inserted. Once the paper is loaded, close the … Read more

To load paper in your HP 6310 printer, remove the output tray. Slide the paper-width guide outward. Align a stack of paper, then place it into the input tray. Adjust the guides to fit the paper size. For legal size paper, lower the input tray front. For more details, check the user guide or setup … Read more

To load paper in the HP DeskJet 3639 printer, raise the input tray. Slide the paper width guide outward. Stack plain white paper in the tray, aligning it properly. Adjust the paper settings based on the size. For further assistance, refer to the step-by-step instructions or watch a detailed video guide. After loading, push the … Read more

To load paper in an Epson photo printer, follow these steps: 1. Close the output tray. 2. Open the front cover. 3. Remove the paper cassette. 4. Adjust the edge guides outward. 5. Place photo paper, printable side down, in the tray. 6. Align the left guide with the paper edge. This ensures clarity and … Read more