To fix a printer not taking paper, follow these steps: 1. Remove all paper from the tray. 2. Check for bent, wrinkled, or torn sheets and throw them away. 3. Look for obstructions in the paper tray. 4. Make sure the paper stack is straight on all sides. 5. Reload the paper stack and close … Read more

To fix a printer not feeding paper, check the paper condition. Ensure the paper is flat and not curled or old. Adjust the paper stack to fit under the arrow mark on the edge guide. Keep the edge guide snug against the paper’s left edge. Check for paper feeding issues and clear any jams. Perform … Read more

To fix lines on printed paper, first run the clean print head option in your printer settings. Next, check the cartridge alignment and inspect the imaging drum for lines. Replace any low or defective cartridges. Adjust the print quality settings, and ensure the paper type matches the loaded paper. This will improve print quality. Also, … Read more

If your printer prints only yellow pages, first check the ink cartridges for faults. Next, inspect the printheads for clogs or dirt. Perform a nozzle check and align the printheads. If issues remain, contact manufacturer support. If the problem persists, consider replacing the printer. Next, examine the printer settings. Verify that the right paper type … Read more

To fix a paper jam in the HP LaserJet Pro M403, follow these steps: 1. Remove Tray 2. 2. Take out any jammed paper and discard damaged sheets. 3. Check that the paper guide matches the paper size. 4. Load fresh paper. 5. Reinsert and close the tray. 6. Press the front-door-release button to reset … Read more

To fix a broken plastic printer tray, power off the HP Smart Tank 7301 or Brother MFC printer and unplug it. Remove the tray and check the tabs and levers for damage. Ensure the actuator is in place. Inspect the transport rollers for issues. Replace any missing parts with sturdy plastic if needed. For broken … Read more

To fix paper stuck in your printer, follow these steps: 1. Turn off and unplug the printer. 2. Open the scanning unit. 3. Check for any jammed paper near the print head. 4. Hold the paper with both hands and gently pull it out to avoid tearing. 5. Ensure no paper is left, then close … Read more

To fix paper size mismatch on HP printers, open printer settings. Click the “Paper” tab. In the “Original Size” drop-down, ensure the size matches the loaded paper. Next, select “Output Size” and choose “Same as Original Size.” Finally, click OK to save your changes. Next, inspect the printer settings directly on the printer’s control panel. … Read more

To fix a paper jam in a printer, follow these clear steps: 1. Check the display panel for jam location. 2. Turn off the printer. 3. Open the cover. 4. Locate the jammed paper. 5. Remove the paper gently. 6. Inspect for debris. 7. Turn the printer back on. These concise instructions ensure accurate troubleshooting … Read more

To fix a “paper out” error on your printer, follow these steps: Check the paper tray for obstructions. Remove any jammed or damaged paper. Make sure the paper stack is even on all sides. Load fresh, flat paper according to the printer specifications. Close the tray and restart the printer to resume printing. Next, verify … Read more